Free Shipping with $99+ Purchase Details

Free Shipping with $99+ Purchase


Free shipping applicable to only UPS Ground - lower 48 United States - on purchases of $99 or more in the same order. Taxes and prior purchases do not qualify toward the minimum purchase requirement and offer cannot be applied to such items. Eligible customers must select this option during checkout in order to receive free shipping. Not applicable to dealers.

  • HOME > PRODUCTS > Remotec Smart Thermostat - ZTS-500

    Remotec Smart Thermostat - ZTS-500


    Manufacturer: Remotec

    Model: Remotec Smart Thermostat - ZTS-500

    Translates Z-Wave thermostat commands to Air-conditioning IR control codes.

    • Description
    • Specs
    • Docs
    • Reviews

    The ZTS-500 is a security Z-Wave enabled thermostat designed to control residential HVAC systems. A security enabled Z-Wave Plus Controller must be used in order to fully utilize the product. Users can use local or remote control and monitor the temperature via an App on smartphones or computers while at home or away through a Z-Wave gateway. It can maximize energy conservation and comfort while minimizing the effort required to maintaining a desired temperature in your home.

    HVAC Systems Compatible

    • 24Vac single & two stage conventional heating systems (gas/oil/electric)
    • Heat pump systems with up to two stages of heating (electric/gas)
    • Zoned forced air and zoned hot water (2 or 3 wire)
    • Millivolt systems (12-24Vac or DC source)
    • One or two stage cooling systems
    • Hybrid systems

    HVAC Systems Not Compatible

    • Radiant floor and wall heating systems
    • Geothermal systems
    • Multi-zoned systems
    • 110V or higher line voltage systems (e.g. electric baseboard heaters)

    Note: Thick black, red, or white wires connected with wire nuts running to existing thermostat typically mean high voltage system.


    • Support "Frequently Listening Routing Slaves" (FLiRS) mode and "Always Listening" mode
    • Support Network Wide Inclusion (NWI) and Explore Frames
    • Support Security and Non- Security command
    • Support battery low and level report
    • Support Association Groups
    • Advanced features through Z-Wave configuration parameters
    • Temperature sensor calibration
    • Filter replacement reminder
    • Z-Wave Plus compliant
    • OTA (over-the-air) firmware upgradeability
    • Energy saving mode
    • Short cycle start up protection
    • Support AA x 4 alkaline batteries (No C-wire required) or standard HVAC 24Vac input

    Thermostat Alerts Messages
    Battery Low Indication
    Filter Replacement
    Defrost Function
    Out of Temperature Range Control Function

      • Z-Wave Chip 500 series
      • Z-Wave: Z-Wave Plus
      • Two groups and 2 devices each (nodes)
    • LED and Button
      • Curved white LEDs display (Wide viewing angle and high contrast ratio with 3 levels brightness control)
      • Resolution: 18 x 6 dots
      • VA: 64mm x 28mm
      • Status icons: 7 "<", ">", "+" and "–" control buttons and LEDs
      • Input: AC 100-240VAC, 50-60Hz
      • Output: AC 24 VAC +/- 20% 50/60Hz
      • Battery: AA x 4pcs
      • Voltage: 24 VAC 50/60 Hz
      • Current: 1A Max. (inductive)
      • Temp Unit: °F or °C
      • Temp Display Resolution: 1°F / 0.5 °C
      • Temp Measurable Range: 32 – 99 °F / 0 – 37 °C
      • Temp Setting Range: 41 – 99 °F / 5 – 37 °C
      • Temp Swing and Differential: 1°F, 2°F, 3°F or 4°F / 0.5°C, 1.0°C, 1.5°C or 2°C
      • Temp Dead Band: 3°F, 4°F, 5°F or 6°F / 1.5°C, 2.0°C, 2.5°C or 3°C
      • 160mm x 100mm x 28mm (HxWxD)
      • FCC, CE, RoHS, Z-Wave Plus, ZigBee, Bluetooth, Wi-Fi
      • up to 8W
      • up to 0.8mW
    • RANGE
      • up to 50m (outdoors) and 40m (indoors)
      • 0-50°C
      • -5-60°C
    • IP CODE
      • IP20

    Be the first to make a review.

    You must be logged in to add a review

    Click the at the top of the page to log in.