Free Shipping with $99+ Purchase Details

Free Shipping with $99+ Purchase


Free shipping applicable to only UPS Ground - lower 48 United States - on purchases of $99 or more in the same order. Taxes and prior purchases do not qualify toward the minimum purchase requirement and offer cannot be applied to such items. Eligible customers must select this option during checkout in order to receive free shipping. Not applicable to dealers.

  • HOME > PRODUCTS > Z-Wave Plus - Dimmable Smart LED Bulb - 60W

    Z-Wave Plus - Dimmable Smart LED Bulb - 60W


    Manufacturer: Domitech

    Model: Z-Wave Plus - Dimmable Smart LED Bulb - 60W

    The Domitech DTA19-750-27 is a Z-Wave controllable, instant-on, LED screw-in light bulb that provides pleasant soft-white illumination equivalent to a 60-watt incandescent bulb, yet uses only 9 watts of energy.

    • Description
    • Specs
    • Docs
    • Reviews

    The DTA19-750-27 offers great value and convenience with an estimated 22+ year lifespan (3 hrs./day avg.), and remote control through a compatible Z-Wave hub or controller.

    • Wirelessly control your lights from anywhere with ease
    • Simple installation - just screw it in.
    • Simple inclusion process - just turn it on
    • Soft White (2700k) Light
    • Automate your lights without an electrician
    • Save energy and cost (60W equivalent light consumers only 9 watts)
    •  Long life (25,000 hours or ~22 years based on 3 hrs/day)
    Z-Wave Plus Certified Device 

    • Bulb Type - A19 inside, E26 base
    • Light Output - 750 lumens
    • Equivalent Incandescent Output - 60 Watts
    • Power Consumption - 9 Watts
    • Color Temperature - Soft White (2700K)
    • Color Rendering Index (CRI) - 80
    • Dimming - 1 to 100 Steps
    • Lifetime - 25,000 hours (~22 years @ 3 hrs/day)
    • Input Voltage/Frequency - 120V/60Hz 108V 120V 138V
    • Operating Temperature - 77°F 32° F 77° F 104° F
    • Chipset - Sigma Designs 500 Series
    • Z-Wave Frequency - 908.4 MHz
    • Wireless Range - 132 feet (open air)
    • Firmware updates - Over-The-Air (OTA) capable
    • Inclusion Process - Network-Wide-Inclusion (NWI) capable where request is forwardedby existing nodes in network
    • Signal Repeater - Repeats Z-Wave signals to enhance mesh network
    • Simple Inclusion Process Set the gateway/controller to inclusion mode, turnon the light bulb power to include to the network. LED bulb will flash twiceto indicate successful inclusion.
    • Manually turn ON the light bulb if light is turned off remotely or via schedule - Flip the wall or lamp switch to OFF and then ON
    • Configuration - Brightness level while resumingthe light bulb from OFF to ON:
      • Parameter 1: There are 2 Valid Values, 0 or 1 (default as 0) When value =0, the brightness level will be resume to full brightness when the lightbulb is turned ON every time.
      • When value = 1, the brightness level will be same as the last dim settingwhen the light bulb is turned ON again.
    • Manually Exclude the light bulb from the network - Flip the wall or lamp switchON/OFF 4 times within 4 seconds
    • Z-Wave Plus Certified
    • UL, cUL, FCC Class B, Industry Canada certified

    Be the first to make a review.

    You must be logged in to add a review

    Click the at the top of the page to log in.