Free Shipping with $99+ Purchase Details

Free Shipping with $99+ Purchase

Restrictions

Free shipping applicable to only UPS Ground - lower 48 United States - on purchases of $99 or more in the same order. Taxes and prior purchases do not qualify toward the minimum purchase requirement and offer cannot be applied to such items. Eligible customers must select this option during checkout in order to receive free shipping. Not applicable to dealers.

  •  
  • HOME > PRODUCTS > ZLINK Products 3-way Dimmer Kit - KITZL-WD-WA-100

    ZLINK Products 3-way Dimmer Kit - KITZL-WD-WA-100

    KITZL-WD-WA-100
    $53.99

    Manufacturer: ZLINK

    Model: ZLINK Products 3-way Dimmer Kit - KITZL-WD-WA-100


    This kit includes WD-100 and WA-100.

    • Description
    • Specs
    • Docs
    • Reviews

    ZL-WD-100 is designed to provide easy on/off and dimming control of incandescent, and dimmable florescent and LED lighting.  The dimmer replaces a standard in-wall light switch or dimmer and with the companion ZL-WA-100 Accessory Switch supports wired 3, 4 and 5-way circuits.   The ZL-WD-100 is a rock solid performer and supports many optional configurable features such as; on/off orientation, ramp up and down times, soft on and off, and dimmer sensitivity for just the right feel. Multi-tap scene control is also supported.  Simply install, add to your Z-Wave network and enjoy complete Z-Wave control.

    Product Features:

    • Works with incandescent and most dimmable florescent (CFL), or LED lighting
    • Supports S2 and SmartStart for easy, secure inclusion
    • Scene control capable, supports double and triple tap control
    • Instantly reports manual status change to controller
    • Single, configurable, LED indicates status
    • Configurable orientation, LED right or left of paddle
    • Fits standard single wall plate
    • Works with ZL-WA-100 accessory switch for wired multi-way circuits

    The WA-100 switch is intended to be used only with Z-Wave certified In-Wall units such as WS-100 and WD-100 modules and any switches in a home. Basic connection is made by a hard wire between the 2 Traveler terminals. Up to 3 units of WA-100 can be added to a particular light switch to form up to a 5-way association. The WA-100 carries no live (Line) power and it’s not transmitting or receiving any RF signal.

    Features:

    • Mounting: Standard J box / Single gang
    • 3-Way Auxiliary switch that works with WS100 wall switch or WD100 wall dimmer
    • Fits standard wall plate
    • Up to Three WA100 Auxillary switches (5 way) can be used with one in wall switch or dimmer
    • When used with WD100 dimmer, WA100 can also be used to control dimming

    WD 100 Technical Specification:

    Electrical

    • Max Load 600W Incandescent, 150W CFL/LED
    • Input: 120VAC, 60Hz, 15A, Neutral required
    • Operating Temp. Range: 32-104°F (0-40°C)
    • UL and cUL listed

    Z-Wave

    • US Region, 908.4MHz, 916MHz
    • Complies with FCC Part 15, Class B
    • Z-Wave PLUS, S2 Security, SmartStart
    • Z-Wave signal repeater
    • Network-Wide-Inclusion
    • Over-The-Air (OTA) firmware upgrade capable
    • Configurable parameters supported

    WA 100 Technical Specification:

    • Model: WA-100
    • Normal operating temperature: 77F (25C)
    • For indoor use only
    • Z-Wave is registered trademark of Sigma Design

    Be the first to make a review.

    You must be logged in to add a review

    Click the at the top of the page to log in.


 
0