ZLINK Products 3-way Dimmer Kit - KITZL-WD-WA-100

by ZLINK
SKU KITZL-WD-WA-100
$58.99

This kit includes WD-100 and WA-100.

  • Description
  • Specs
  • Docs

ZL-WD-100 is designed to provide easy on/off and dimming control of incandescent, and dimmable florescent and LED lighting.  The dimmer replaces a standard in-wall light switch or dimmer and with the companion ZL-WA-100 Accessory Switch supports wired 3, 4 and 5-way circuits.   The ZL-WD-100 is a rock solid performer and supports many optional configurable features such as; on/off orientation, ramp up and down times, soft on and off, and dimmer sensitivity for just the right feel. Multi-tap scene control is also supported.  Simply install, add to your Z-Wave network and enjoy complete Z-Wave control.

Product Features:

  • Works with incandescent and most dimmable florescent (CFL), or LED lighting
  • Supports S2 and SmartStart for easy, secure inclusion
  • Scene control capable, supports double and triple tap control
  • Instantly reports manual status change to controller
  • Single, configurable, LED indicates status
  • Configurable orientation, LED right or left of paddle
  • Fits standard single wall plate
  • Works with ZL-WA-100 accessory switch for wired multi-way circuits

The WA-100 switch is intended to be used only with Z-Wave certified In-Wall units such as WS-100 and WD-100 modules and any switches in a home. Basic connection is made by a hard wire between the 2 Traveler terminals. Up to 3 units of WA-100 can be added to a particular light switch to form up to a 5-way association. The WA-100 carries no live (Line) power and it’s not transmitting or receiving any RF signal.

Features:

  • Mounting: Standard J box / Single gang
  • 3-Way Auxiliary switch that works with WS100 wall switch or WD100 wall dimmer
  • Fits standard wall plate
  • Up to Three WA100 Auxillary switches (5 way) can be used with one in wall switch or dimmer
  • When used with WD100 dimmer, WA100 can also be used to control dimming

WD 100 Technical Specification:

Electrical

  • Max Load 600W Incandescent, 150W CFL/LED
  • Input: 120VAC, 60Hz, 15A, Neutral required
  • Operating Temp. Range: 32-104°F (0-40°C)
  • UL and cUL listed

Z-Wave

  • US Region, 908.4MHz, 916MHz
  • Complies with FCC Part 15, Class B
  • Z-Wave PLUS, S2 Security, SmartStart
  • Z-Wave signal repeater
  • Network-Wide-Inclusion
  • Over-The-Air (OTA) firmware upgrade capable
  • Configurable parameters supported

WA 100 Technical Specification:

  • Model: WA-100
  • Normal operating temperature: 77F (25C)
  • For indoor use only
  • Z-Wave is registered trademark of Sigma Design