ZWaveProducts - Z-Wave Plus 3-Way Dimmer Kit with Instant Status - KITZWP-WD-WA-100

Sold out

The ZWaveProducts three-way dimmer kit includes: The ZWaveProducts In Wall Multi-Level Light Dimmer WD-100 and The ZWaveProducts Auxiliary Switch WA-100.

  • Description
  • Specs
  • Docs

This kit includes:

1x ZWP-WD-100

ZWaveProducts WD-100 is a member of the Z-Wave family and communicates with other Z-Wave certified devices in a control network. WD-100 replaces a standard in-wall light switch and turns it into a Z-Wave controlled network device with dimming and On/Off light control. Each Z-Wave device serves as a node to repeat the signal in the network, thus, extending the overall Z-Wave mesh wireless network range. Different types and brands of Z-Wave devices can be associated with ZWaveProducts in your system and they will work together to optimize and expand the coverage of your Z-Wave network. Once setup is completed, you can enjoy the convenience and leisure which WD-100 offers.


  • Works with incandescent and most dimmable florescent (CFL), or LED lighting
  • Scene control capable
  • Instantly reports manual status change to controller
  • Over the air (OTA) firmware upgrade available with controllers/gateways that support OTA
  • 7 LED indicators
  • Z-Wave Plus certified
  • Z-Wave 500 series module inside
  • Fits standard single wall plate
  • Fits standard multiple gang junction box.

1x ZWP-WA-100

This switch is intended to be used only with ZWaveProducts Z-Wave certified In-Wall units such as WS-100 and WD-100 modules and any 3 way switches in a home. Basic connection is made by a hard wire between the 2 Traveler terminals. Up to 3 units of WA-100 can be added to a particular light switch to form up to a 5-way association. The WA-100 carries no live (Line) power and it’s not transmitting or receiving any RF signal.


  • Mounting: Standard J box / Single gang
  • 3-Way Auxiliary switch that works with ZWaveProducts WS100 wall switch or WD100 wall dimmer
  • Fits standard wall plate
  • Up to Three WA100 Auxillary switches (5 way) can be used with one ZWaveProducts in wall switch or dimmer
  • When used with ZWaveProducts WD100 dimmer, WA100 can also be used to control dimming
  • Model: WD-100
  • Input power: 120 VAC, 60 Hz.
  • Max output loading:
    • 1x gang box 600W incandescent, 150W dimmable CFL/LED
    • 2x gang box 500W incandescent, 125W dimmable CFL/LED
    • 3x gang box 400W incandescent, 100W dimmable CFL/LED
  • Radio frequency: 908.4/916 MHz
  • Wireless range: up to 130ft line of sight between the controller and the other available nodes.
  • Normal operating temperature: 77F (25C)
  • For indoor use only
  • Model: WA-100
  • Normal operating temperature: 77F (25C)
  • For indoor use only
  • Z-Wave is registered trademark of Sigma Design