MCO IR Thermostat 800 Series Z-Wave

SKU IR2900
Save 7%
$120.00
$112.00

IR2900 is a Z-Wave 800 series thermostat which is compliant to Z-Wave-to-IR bridge to control split air conditioner by receiving Z-Wave command and converting to Infrared command. IR2900 can control various brands and models of split air conditioner globally combination with the all-around built-in and cloud-stores IR database. With distinct display, you can intuitively read the room temperature with setting buttons to have a peace-in-mind smart home control experience.



       Specification

Power Supply: rechargeable battery/ 5V USB Type-C

Z-Wave 800 series

Support S2 encryption

Temperature Range: 0~99.9℃(32-211.82℉)

Humidity Range: 0%~99%RH

Working Environment:-20~+60℃ <99%RH  (Non-condensation)

Dimension: 105*105*15.6 mm  

Z-Wave Frequency: Operating frequency range, defined by the regulatory bodies (for Z-wave in Europe: 868.4 MHz, or other regions 908.4/916.0 MHz , 921.4 MHz)

Housing: PC+ABS

Hole pitch: 60.3mm

Installation: wall-mounted or tabletop placing



 

There are four scene applications for IR2900.


Scene application 1:

Heating and cooling with IR control, under this application, IR2900 is able to directly associate with a Z-Wave on/off module to control a heating equipment like wall-mounted boiler as well as controlling an IR split air conditioner for cooling.

(Note: it is able to associate with at most 5 pieces of Z-Wave on/off modules, the heating equipment can be replaced by a cooling equipment or a fan or other on/off equipments)

 

Scene application 2:

Heating and cooling with association group control, under this application, IR command is not used for cooling and heating neither. IR2900 will work as a general wireless Z-Wave thermostat.

 

Scene application 3:

Heating with IR control, cooling with association group control, under this application, IR command is used for heating only.

 

Scene application 4:

Cooling with IR control, heating with association group control, under this application, IR command is used for cooling only.


Please download annex to get more information.