Free Shipping & New Low Cost Options Available Details

NEW, LOWER-COST SHIPPING & FREE SHIPPING WITH $99+ PURCHASE

Restrictions

Free shipping applicable to only UPS Ground - lower 48 United States - on purchases of $99 or more in the same order. Taxes and prior purchases do not qualify toward the minimum purchase requirement and offer cannot be applied to such items. Eligible customers must select this option during checkout in order to receive free shipping. Not applicable to dealers.

Be Free From Wiring with Z-Wave Lighting from Go Control


GoControl LED Bulb

LB60Z-1


Ideal for table and floor lamps, this A19 style LED bulb provides a pleasant, soft-white light.

  • Dimmable to tailor the light to any mood or task
  • Adds Z-Wave lighting to your home without wiring (Z-Wave Controller needed)
  • 750 lumens (60 Watt equiv.) yet uses only 9 Watts
  • 2700K Soft White light is gentle and warm
  • Add Z-Wave lighting to your home without wiring (Z-Wave Controller needed)
  • Long-life LED has a 22 year lifespan (based on 3 hours use per day)

Retail Price: $19.99

Sale Price: $12.99

Shop Now


GoControl LED Flood

LBR30Z-1


This dimmable BR 30 style LED bulb is ideal for areas that require vivid, energizing light.

  • Fits 5” or 6” recessed fixtures
  • Adds Z-Wave lighting to your home with no wiring (Z-Wave Controller needed)
  • 650 lumens (65 Watt flood equiv.) yet uses only 7.5 Watts
  • 5000K cool-white/daylight energizes task areas and improves visual detail
  • Customize light to suit the task; even lights on one circuit
  • Long-life LED has a 22 year lifespan (based on 3 hours use per day)

Retail Price: $37.99

Sale Price: $16.00

Shop Now


GoControl LED Retrofit Kit

LB65R6Z-1


This screw-in kit replaces old, outdated incandescent screw-in bulbs in 5 in. or 6 in. recessed lighting fixtures.

  • Fits 5” or 6” recessed fixtures
  • Adds Z-Wave lighting to your home with no wiring (Z-Wave Controller needed)
  • 650 lumens (65 Watt equiv.) yet uses only 8.5 Watts
  • 2700K Soft White light is gentle and warm
  • Long-life LED has a 22 year lifespan (based on 3 hours use per day)

Retail Price: $43.95

Sale Price: $25.50

Shop Now


GoControl Wireless Remote Switch

WA00Z-1


  • Great for controlling GoControl Z-Wave lightbulbs
  • Easily controls on/off or dimming of Z-Wave lighting
  • One switch can control up to 10 Z-Wave bulbs, plug-in modules, or switches
  • Mounts over any standard or Decora-style switch, or on just about any surface (simple self-adhesive mounting pads included)
  • No wiring - batteries included
  • Works with VeraEdge, VeraPlus, FIBARO Home Center, HomeSeer, Zipato, SmartThings, and many more!

Retail Price: $49.99

Sale Price: $24.95

Shop Now


How To: Add Z-Wave to your home lighting, even if you rent, have an older home, or just don’t want to rewire:

In this blog learn how to pair Z-Wave bulbs with your existing Z-Wave gateway or hub, and control them locally with a nifty GoControl Wireless Wall switch.

(Don’t have a Z-Wave gateway or hub? Check out these).

  • No wiring
  • Choice of lighting types
  • Perfect for renters
  • Add voice control to your lighting, using Amazon Alexa or Google Home (Z-Wave compatible gateway required).

You will need:

  • GoControl WA00Z-1 Wireless Remote Switch
  • Bulbs as needed (see next section)
  • 1 small slotted screwdriver
  • 1 small Phillips screwdriver
  • Access to your Z-Wave gateway interface

Choose your bulb style:

 

For table and floor lamps, you’ll want the Go Control LB60Z-1 LED. This LED bulb provides a pleasant, soft-white light (2700K) at 750 lumens (60 Watt equiv.) and uses only 9 Watts of power. It has a 22 year lifespan*.

For 5" or 6" recessed lighting fixtures, choose the Go Control LBR30Z-1. This cool-white/daylight flood light (5000K) gives you 650 lumens of energizing light (65 Watt equiv.) and uses only 7.5 Watts of power! It has a 22 year lifespan*.

Turn your energy-wasting incandescent recessed fixture into a Z-Wave LED with this retrofit kit. Automate and customize lighting levels based on use. Especially good for a large room on one circuit. You can set dim levels in scenes, and control them via your smartphone, or the WA00Z-1 (see below).

*Based on 3 hours of use per day.

All these bulbs have simple Installation - just screw in and include!
To add your choice of bulb to your Z-Wave network:

1. Put your Z-Wave controller in inclusion mode.
2. With the power on, screw in the light bulb.
3. Rename the device and save it to your network (see your controller’s instructions for more info).

For local control, add this Go Control Wireless Remote Switch, WA00Z-1

Add a switch ANYWHERE, in just minutes!

 

This battery operated wireless switch/dimmer/scene controller can be added to any wall surface with peel and stick tape. You have a choice of two body styles; one that covers a single gang wall switch completely with screws***, one that fits on top of one portion of a multi-gang wall switch with screws*** or any combination with peel and stick tape. In this demo, we’re showing how it can be added to cover an existing ‘dumb’ Decora-style rocker with included screws.

This device is NOT a Z-Wave controller, and must be added to a Z-Wave system.

***screw holes ONLY line up with Decora-style rocker switches. For toggle-style switches, use double stick tape. In some cases the toggle-style switch does not have enough surface area, and the WA00Z-1 needs to be surface mounted next to the existing switch on a blank wall.

Steps

1. We cannot add a Z-Wave dimmer that requires a neutral because this dumb rocker switch doesn't have one. This is a perfect case for the GoControl Wireless Smart Switch. We’ve already added the Z-Wave light bulbs to the circuit that this switch controls, so we need to make sure to keep the switch ON from now on. 



2. Remove the wall plate from the existing switch with the slotted screwdriver. 



3. Use a Phillips screwdriver with the supplied screws, and install the WA00Z-1 body in place of the wall plate you removed. Do not over tighten. 



4. Put your Z-Wave controller in inclusion mode.

5. Pull out the clear tape from the WA00Z-1’s battery and push a button to wake the unit (If you already removed the clear tape, push either button on the unit.). The green LED should blink twice.

6. Rename the device and save it to your network (see your controller’s instructions for more info).

NOTE: Adding this to our FIBARO Home Center 2, the Central Scene Control gives us a few choices. Each button has a HOLD and a PUSH option. You can use this to trigger scenes on your Z-Wave Controller. Vera Edge, Vera Plus, HomeSeer and FIBARO all work the same way. SmartThings works well with the available device handler. 



7. Test the device that it works as expected, then snap on the cover.

The GoControl WA00Z-1 makes Z-Wave Smart Bulbs as easy in practice as they seem in concept. See the WA00Z-1 instruction sheet for more information on associations, configuration, and OTA updates.

Need assistance? Get help!
• Create a ticket in our Live Chat program. We'll get back to you in an hour or so (during business hours - 9-5 Eastern Time, M-F).
• Create a ticket using our Ask An Expert form. Our experts will take a look at your question, confer, and get you an answer; usually within a day. 
• Need immediate help? Call our tech department at 201.706.7198 (9-5 Eastern Time, M-F).

 
 

Recommended Topics


 

SHOP WITH CONFIDENCE

30-day return policy
quality products
over 12 years in business
0