Dome Wireless Z-Wave Plus Leak Sensor With Remote Probe
Are you worried about your appliances springing water leaks? Use the Dome Home Automation Leak Sensor to prevent water leaks in even the tightest areas. This water leak detector sends wireless signal alerts as soon as it detects a leak. Stop leaks in their tracks with this dome water leak sensor.
The Dome Home Automation DMWS1 Leak Sensor is purpose built to withstand a wet environment it may find itself in. It is suitable for areas where leaks are likely to occur: sinks, toilets, washing machines and water heaters. The Leak Sensor’s flat design allows it to be easily slid under common household appliances with low clearance from the floor. Additional flexibility is provided with a Remote Sensor extending 4 feet for placing it in hard to reach areas and sump pump pits. Once the leak is detected, the Leak Sensor will alert you by beeping locally and it will send an instant notification to your smart home system. With a Z-Wave Certified Hub, this sensor can be set up to trigger sirens, lights and custom automation scenes or even turn off the water when used with Dome Water Main Shut Off (DMWV1). Extra-long Z-Wave wireless range (up to 150 feet) allows you to place it where it’s needed without worrying if the signal is reaching your Z-Wave Hub. There is a 3-year battery life, so you can always be confident that your sensor has power. Dome DMWS1 Leak Sensor comes with a 1-year limited warranty. Measurements in inches: 2.625 by 2.625 by 1.125. Dome Home Automation Z-Wave devices give your family peace of mind and security you can count on. With Dome, you’re always connected and always covered. **Officially Integrated with Wink.
- Sends wireless signal alerts to you controller whenever water is detected
- Equipped with siren alarm to notify anyone at home of a possible leak
- 2 flexible mounting options - with or without external probe
- Use with Shut-off Valve for automated flood prevention system
- Extra long range and signal speed with new Z-Wave Plus technology
- Long battery life (up to 3 years)
- Make the product work for you with a handful of advanced options*
- 1-year warranty
You can use the Dome Wireless Z-Wave Plus Leak Sensor to prevent water damage in your home. This dome water sensor is built with the latest water-resistant materials and Z-Wave Plus technology. The signal speed and long range are both advantageous for homeowners trying to save thousands of dollars in water damage. Protect your home. Monitor every appliance that could spring a leak with this Z-Wave leak sensor.
Installing Your Wireless Leak Sensor
There is an incredibly simple procedure to install your new Z-Wave Plus leak sensor. The first step to integrate your Dome Home Automation leak sensor is adding it to your existing Z-Wave network. If you are installing your device within close range of your gateway controller, you can choose to mount your smart home system with or without the cradle included with your device. If you choose to mount your leak sensor using the cradle, attach the cradle to the body of your sensor. Ensure that all of the sensor’s metal feet are fastened inside the contacts. You can then easily attach your new device to the wall using screws and anchors. To install your system without the cradle, just place your device flat on the required surface. The only consideration to keep in mind is that all metal feet must be touching the surface evenly.
Power supply Single CR2 3.0V battery
Working current 35mA
Power Consumption 0.13W
Operating temperature 32 - 104 °F (0 - 40 °C)
Warranty One Year Parts & Labor
Sensor Dimensions Ø2.63” x 1”