ZLINK Products 3-way On/Off Kit - KITZL-WS-WA-100

by ZLINK
SKU KITZL-WS-WA-100
$53.99

This kit includes the WS-100 and WA-100.

  • Description
  • Specs
  • Docs

ZL-WS-100 is designed to provide easy On/Off Z-Wave control of incandescent, florescent and LED lighting.  The switch replaces a standard in-wall light switch and with the companion ZL-WA-100 Accessory Switch supports wired 3, 4 and 5-way circuits.   Features include configurable orientation, selectable LED operation, and multi-tap scene control. Simply install, add to your Z-Wave network and enjoy complete Z-Wave control.  

Product Features:

  • Works with incandescent, CFL, or LED lighting
  • Supports S2 and SmartStart for easy, secure inclusion
  • Scene control capable, supports double and triple tap control
  • Instantly reports manual status change to controller
  • Configurable on/off orientation and nightlight feature
  • Fits standard single wall plate
  • Works with ZL-WA-100 accessory switch for wired multi-way circuits

The WA-100 switch is intended to be used only with Z-Wave certified In-Wall units such as WS-100 and WD-100 modules and any switches in a home. Basic connection is made by a hard wire between the 2 Traveler terminals. Up to 3 units of WA-100 can be added to a particular light switch to form up to a 5-way association. The WA-100 carries no live (Line) power and it’s not transmitting or receiving any RF signal.

Features:

  • Mounting: Standard J box / Single gang
  • 3-Way Auxiliary switch that works with WS100 wall switch or WD100 wall dimmer
  • Fits standard wall plate
  • Up to Three WA100 Auxillary switches (5 way) can be used with one in wall switch or dimmer
  • When used with WD100 dimmer, WA100 can also be used to control dimming

WS 100 Technical Specification:

Electrical

  • Max Load 900W Incandescent, 200W CFL/LED, 1.2 HP Motor, 1800W Resistive
  • Input: 120VAC, 60Hz, 15A, Neutral required
  • Operating Temp. Range: 32-104°F (0-40°C)
  • UL and cUL listed

Z-Wave

  • US Region, 908.4MHz, 916MHz
  • Complies with FCC Part 15, Class B
  • Z-Wave PLUS, S2 Security, SmartStart
  • Z-Wave signal repeater
  • Network-Wide-Inclusion
  • Over-The-Air (OTA) firmware upgrade capable
  • Configurable parameters supported

WA 100 Technical Specification:

  • Model: WA-100
  • Normal operating temperature: 77F (25C)
  • For indoor use only
  • Z-Wave is registered trademark of Sigma Design