Free Shipping with $99+ Purchase Details

Free Shipping with $99+ Purchase

Restrictions

Free shipping applicable to only UPS Ground - lower 48 United States - on purchases of $99 or more in the same order. Taxes and prior purchases do not qualify toward the minimum purchase requirement and offer cannot be applied to such items. Eligible customers must select this option during checkout in order to receive free shipping. Not applicable to dealers.

  •  
  • HOME > PRODUCTS > Z-Wave Micro Switch

    Z-Wave Micro Switch

    DSC26103-ZWUS
    $34.95

    Manufacturer: Aeon Labs

    Model: Z-Wave Micro Switch


    The Aeon Labs Micro Switch G2 is a low-cost Z-Wave appliance module specifically used to enable Z-Wave command and control (on/off) for existing in-wall switches.

    • Description
    • Specs
    • Docs
    • Reviews

    This wireless module is powered from a main power supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.

    It also is a repeater in the Z-Wave network. Acting as a bridge for communication, it will forward Z-Wave command messages to their destinations if the originating controller is out of range from the destination node.

    By taking advantage of the Z-Wave mesh network, commands can be routed to their destination via intermediary "listening" Z-Wave products. Products that are Z-Wave certified can be used and communicate with other Z-Wave certified devices.

    • The new Micro Switch is one of Aeon Labs' 2nd edition products. Each has been rebuilt from the inside out, reducing their size while embedding into them the latest Z-Wave firmware and commands. That empowers them with everything from enhanced stability to Z-Wave's Explorer Frames.
    • Three way wiring compatible. Wiring isn't always straightforward and while the Micro Switch will work with simple wiring, it'll also work with complex, 3-wire / 3-way installations for lights and appliances
    • Use your existing switches. Just because you want enhance your switches, doesn't mean you want to change your physically change them. Each Micro Switch works with your existing light switches, allowing for invisible installation that suits your decor perfectly.
    • Small in size. There usually isn't much space behind your light switches, that's why we've reduced the size of our 2nd edition Micro Switch. It's now only 1.8cm deep, helping to ensure world wide compatibility. Simple installation. Some home automation installations require a lot of expensive cables to be installed. Not so with Aeon Labs'. The Micro Switch utilizes your existing wires, and can be easily installed with little more than a screwdriver.
    • Precise control. Rooms don't have just one appliance - it's likely that areas like your home theater have multiple switches. That's why the Micro Switch can be part of a scene, allowing you to group switches together so they work in sync and talk to each other effortlessly
    • Output: 10A max. output
    • Transmitting Power: 0 dBm
    • Range: 100ft
    • Control Function: TRIAC
    • Operating Temp.: 0-70?C
    • Operating Humidity: 95%
    • Dimensions: 52mm x 49mm x 18.5mm
    • Certifications: FCC, cUL, CE, ROHS
    • Firmware updatable in field by end-consumer

    Be the first to make a review.

    You must be logged in to add a review

    Click the at the top of the page to log in.


 
0