Free Shipping with $99+ Purchase Details

Free Shipping with $99+ Purchase

Restrictions

Free shipping applicable to only UPS Ground - lower 48 United States - on purchases of $99 or more in the same order. Taxes and prior purchases do not qualify toward the minimum purchase requirement and offer cannot be applied to such items. Eligible customers must select this option during checkout in order to receive free shipping. Not applicable to dealers. 

  •  
  • HOME > PRODUCTS > Fibaro Flood Sensor, FGFS-101 ZW5, Z-Wave Plus Water Leak Detector

    Fibaro Flood Sensor, FGFS-101 ZW5, Z-Wave Plus Water Leak Detector

    FGFS-101 ZW5
    $59.99

    Manufacturer: Fibaro

    Model: Fibaro Flood Sensor, FGFS-101 ZW5, Z-Wave Plus Water Leak Detector


    FIBARO Flood Sensor is a universal, Z-Wave Plus compatible, flood and temperature sensor.

    • Description
    • Specs
    • Docs
    • Reviews

    The Fibaro Flood Sensor is the most functional water leak sensor for your smart home. It is designed to either be placed on the floor or a wall with the gold-plated water-sensing probes Extended by a connected wire. The device can be battery* or VDC powered (12/24 VDC). it has a built-in tilt sensor that reports any movement of the device to the central Z-Wave controller. The Fibaro Flood Sensor is buoyant and can float on the waterfall surface. It has a built-in temperature sensor that can alert you if there is an increase or decrease in temperature, which can protect your home from damage caused by frozen pipes. The Fibaro Flood Sensor is compatible with most Z-Wave smart hubs such as Home Center 2 and Lite, SmartThings, HomeSeer, Vera, Clare Controls, and Nexia.

    Features:

    • The ultimate Z-Wave Plus water leak sensor/detector, with temperature and tilt sensor
    • Get alerted on your smartphone/tablet/email, trigger certain lights, activate specific scenes, or even sound an alarm when water is detected
    • Three 24K plated Gold telescopic feet always makes contacts with both even and uneven surfaces and never corrodes
    • Built-in temperature sensor can alert you If there is a sudden rise or fall in temperature, which can help prevent damage due to frozen pipes
    • Z-Wave Plus certified sensor with enhanced features such as longer battery life and better range: ZC10-16025007

    Works with:

    Fibaro Home Center 2
    Fibaro Home Center Lite
    HomeSeer
    Nexia
    SmartThings Hub
    VeraEdge Z-Wave Gateway Controller
    VeraLite Z-Wave Gateway Controller (running under UI7)
    VeraPlus Z-Wave Plus Advanced Home Controller
    Zipato Z-Wave Zipabox Smart Home Controller
    Zipato ZipaTile Home Automation Controller

    Power supply: Battery and/or power supply unit
    Battery type: 3V, CR123A
    Supply type: 12–24VDC, LPS or NEC class 2
    Power consumption (at DC operation): 0.4W
    Maximum voltage at output terminals (ALARM NC, TAMP NC): 24VDC / 20VAC
    Output terminals maximum current carrying capacity: 25mA
    EU standards compliance: RoHS 2011/65/EU
    R&TTE 1999/5/EC
    Radio protocol: Z-Wave (500 series chip)
    Radio frequency: 868.4 or 869.8 MHz EU;
    908.4, 908.42 or 916.0 MHz US;
    921.4 or 919.8 MHz ANZ;
    869.0 MHz RU;
    Range: up to 50m outdoors up to 40m indoors (depending on terrain and building structure)
    Operating temperature: 0–40°C
    Measured temperature range: -20–100°C
    Temperature measuring accuracy: 0.5°C (within 0–40°C range)
    Dimensions (Diameter x Height): 72 x 28 mm

    Weight (specify lbs ): 0.9 pound
    Dimensions: (diameter x height): 72 x 28 mm (2.8 x 1.1 inch)

    Be the first to make a review.

    You must be logged in to add a review

    Click the at the top of the page to log in.


 
0