The ZIR000 Zwave Motion Sensor Use this Z-Wave motion detector to detect motion in any room. Designed for indoor use, the motion detector is mounted using the supplied mounting bracket and has an adjustable lens that can be set for either a wide angle, or long range coverage pattern.
The ZIR000 configuration options are quite unique and extremely flexible. It can send a signal when it's case is opened (tamper), when the batteries are low, and can operate in one of three modes allowing it to be used with light modules, zwave controllers and alarm systems.
Features:
- Compact motion detector for indoor use, compatible with ZWave networks
and devices from ACT and other manufacturers
- Includes mounting bracket
- Configurable coverage area: Wide - 39 foot x 110 degree / Narrow
- 46 feet x 5 degrees
- Sensitivity settings: low, medium, high
- Configurable off/idle delay
- low battery alert
- case tamper alert
- Lighting Mode: The ZIR000 can be paired to a ZWave light switch,
lamp module, etc to turn it on when motion is detected, and off when motion
stops after a user-defined period of time from 3min-258 min
- Alarm Mode: Compatible with ZWave Alarm Systems
- Sensor Mode: Used to link to controllers to provide updates when motion
is sensed, and when motion is not sensed.
- Powered by 4 x AA batteries
- FCC and IC certified
- Mounted Dimensions (H x W x D) 4.125" x 2.6" x 3.10" (10.47cm
x 6.6cm x 7.8 cm)
More
