VRCZ4-MRZ - vizia rf + 4-Button Zone Controller with Switch New Feature! The -MR version has a built-in 15A switch that can be assigned to any one of the 4 buttons. Description: The 4-button zone controller with IR remote capability is ideal for remote control of up to four different zones (areas) of vizia rf + scene-capable devices. The controller uses Z-Wave® protocol transmissions to control other Leviton Vizia RF + Z-Wave enabled devices as well as Z-Wave compliant devices from other manufacturers. The top four buttons on the controller provide ON/OFF switching of four zones/areas. The bottom button transmits DIM/BRIGHT commands to the most recently switched-ON zone (area). An optional IR handheld remote controller (VRMR1-0SG) can be used to activate the vizia rf + 4-button zone controller’s ON/OFF/DIM/BRIGHT commands. Features: Includes: Light Almond, Ivory and White colors -Provides remote ON/OFF/DIM/BRIGHT control of four zones (areas) of Leviton Vizia RF + and other manufacturers’ compatible devices Key cap with IR window included to expose internal IR receiver for this device Separate IR Remote (VRMR1) available to control ON/OFF/DIM/BRIGHT for the four programmed zones 15A 1800VA 1/2 HP Features of all Controllers: Two-way status updates when used with Leviton vizia rf + devices Provides user-level control of 128 devices (VRCZ4 and VRCS4 only) Each button on a RF controller can be associated with up to 32 select Z-Wave compatible devices in a system area (The VRCZ1 can be associated to only one device) Green locator LED illuminates when load is OFF (1-Button Controllers in the virtual switch application) LED illuminates when the controlled scene is active or when one load is on in any zone (area) High gloss finish complements a wide range of décors Superior versatility provides six product options in one box: 3 changeable faceplates and single pole or 3-way Fits in a single-gang 18 cubic-inch wall box compatible with Decora Plus screwless and Decora® standard wallplates Utilizes existing 120VAC 60Hz wiring (when neutral wire is present) for easy "no-new-wires" installation Z-Wave® compatible Load free controllers

Please login to leave a review.