Two-way status updates Provides user-level control of 128 devices Each button on a RF controller can be associated with up to 32 select Z-Wave compatible devices in a system area LED illuminates when the controlled scene is active or when one load is on in any zone (area) High gloss finish complements a wide range of décors Essential Info The Vizia RF + 4-Button Zone Controller (VRCZ4-1L) with IR Remote Capability is ideal for remote control of up to four different zones (areas) of Vizia RF + scene-capable devices. The Controller uses Z-Wave protocol transmissions to control other Leviton Vizia RF + Z-Wave enabled devices as well as Z-Wave compliant devices from other manufacturers. The top four buttons on the controller provide ON/OFF switching of four zones/areas. The bottom button transmits DIM/BRIGHT commands to the most recently switched-ON zone (area). An optional IR Handheld Remote Controller (VRMR1-0SG) can be used to activate the Vizia RF + 4-Button Zone Controller's ON/OFF/DIM/BRIGHT commands. More Info Superior versatility provides six product options in one box: 3 changeable faceplates and single pole or 3-way Fits in a single-gang 18 cubic-inch wall box compatible with Decora Plus screwless and Decora standard wallplates Utilizes existing 120VAC 60Hz wiring (when neutral wire is present) for easy ôno-new-wires" installation Z-Wave compatible Load free controllers Provides remote ON/OFF/DIM/BRIGHT control of four zones (areas) of Leviton Vizia RF + and other manufacturers' compatible devices Key cap with IR window included to expose internal IR receiver for this device Separate IR Remote (VRMR1) available to control ON/OFF/DIM/BRIGHT for the four programmed zones Light dimmer acts as a multi-way slave switch, turning connected lights on to last dimming level Switch has built-in IR receiver and will repeat IR commands over RF to other Z-Wave-enabled switches in the home Z-Wave commands are sent over RF, so no rewiring is necessary, and no powerline interference will affect reliability Essential Info Add 3-way control to any four lights or groups of lights in your home. The Vizia RF Z-Wave 4-Zone Controller w/Dimming provides instant 3-way or 4-way capabilities to any four Vizia RF Z-Wave lighting switches. Once installed, you'll be able to turn on connected lights with a touch of a button, automatically brightening them to their last dimming level. This Leviton switch also has a built-in IR receiver, which lets it repeat IR commands from the IR Remote over RF to other Z-Wave-enabled switches in your home. Simple 2-wire installation - just remove your existing switch and install the Vizia RF 4-Zone Controller, then program it. The Vizia RF Z-Wave Programmer/Controller is required for all Vizia installations and is sold separately. Decora-style wall plates are also sold separately.

Please login to leave a review.