ASPIRE RF 1000 WATT LOW VOLTAGE
ASPIRE RF™ Dimmers replace regular switches or dimmers to provide local and remote
ON/OFF/DIM/BRIGHT control and are compatible with Incandescent, Magnetic Low-Voltage
and Electronic Low-Voltage lighting loads. Moreover, ASPIRE RF Dimmers provide other
programmable functions (scenes, events, association, child lockout, etc…) when used
with ASPIRE RF or other Z-Wave® compliant controller*. Each dimmer can be manually
controlled and remotely controlled by commands sent from an ASPIRE RF controller or
other Z-Wave compatible controllers or programs. ASPIRE RF Dimmers utilize existing
120 V/AC 60Hz standard house wiring and fit into standard wallboxes. No new wiring
needed.
*(Note: some specific ASPIRE RF features may not be programmable)
• With the award-winning ASPIRE™ Design System aesthetics,
ASPIRE RF devices match perfectly with any ASPIRE device
• Offered in three custom colors, Desert Sand, Silver Granite
and White Satin
• Softly curving arch; contrasting textures; velvet-smooth, quiet
actuation; and colors that subtly complement each other make
ASPIRE RF devices an integral element of any décor
• Fits in a single-gang wallbox and can be multi-ganged.
• Virtually unbreakable, ultrasonically welded top and backbody,
extra-long, extra-wide mounting straps and easy access ground
screws provide reliability and speeds up installation
• Compatible with ASPIRE Design System screwless wallplates
• Amber LED at bottom of LED display indicates On/Off load status
• Electro-mechanical push pad for ON/OFF operation with separate
DIM/Bright bar
• LED light-level display for presetting illumination levels and
master/accessory units for multi-location control
• LED reduces brightness when in the OFF state
• 7 step blue LED display alongside push pad indicates selected
light level – even in full daylight
• Can be used for multi-location control with use of Accessory
Dimmers (RF9542-Z)
• Works with ASPIRE RF Accessory Dimmer (RF9542-Z) for wireless
3-way control, eliminating the need for traditional 3-way wiring
or for a dedicated traveller wire
• Uses 200 Series Z-Wave chip at 40Kbs transmission rate
• Programmable rapid and delayed fading up to 4 minutes
(default is 10 seconds)
• Single button programming
• Z-Wave Compliant Certified
• Air-gap switch disconnects power from load forcing an OFF condition.
• RFI filtering for radio, audio and video equipment
• Adjustable ramp rate (up to 4 minutes)
• Child Lockout feature
• Can be associated with up to 5 other devices
• All-On/All-Off inclusion
• Patent Pending Panic Mode
• Patented indicator system alerts if dimmer is not set up in the
network
• Pressing and holding push pad for 2 seconds brings light to full
brightness without affecting preset levels
• Power failure memory
• Configurable “Power on State”
Operation Features & Benefits
Applications
Design Features & Benefits
United States 203 Cooper Circle, Peachtree City, GA 30269 • Phone: (866) 853-4293 • Fax: (800) 329-3055
Canada 5925 McLaughlin Road, Mississauga, Ontario, L5R 1B8 • Phone: (800) 267-1042 • Fax: (800) 761-5748
Project Name: Project Number:
Prepared By: Date:
Catalog Nos. RF9534-N, RF9535-N, RF9536-N, RF9537-N
ASPIRE RF Dimmers
1.
RF Smart Dimmers
Catalog No. 1-Gang 2-Gang 3 or more Gangs
RF9534-N 600W (MLV-450W) 600W (MLV-450W) 600W (MLV-450W)
RF9535-N 600W 600W 600W
RF9536-N 1000W (MLV-750W) 800W (MLV-600W) 800W (MLV-600W)
RF9537-N 1000W 800W 800W
PERFORMANCE
Rating: 120 V/AC, 60Hz
Derating is required in multi-gang installations (See Derating Chart listed below)
PERFORMANCE CONSIDERATION:
An ASPIRE RF™ Z-Wave® enabled device must be within 60 feet of
another Z-Wave enabled device to participate in a Z-Wave wireless
mesh network. Any one dimmer or switch can be associated with
up to 5 devices (dimmers, switches, receptacles or plug-in modules).
TESTING & CODE COMPLIANCE
cULus Listed 6B28
NOM Certified
Complies with FCC Part 15, Class B
Z-Wave Compliant Certified
TERMINATIONS
Dimmers have 4 wire leads for line, load, ground and neutral
MATERIAL CHARACTERISTICS
Meets flammability rating: V2 per UL94
Temperature Rating: 32ºF to 104ºF (0ºC to 40ºC)
WARRANTY
• 5 year limited product warranty.
• Product and performance warranties are extended to 10 years
if installed as part of an ASPIRE RF Certified Installer System
Technical Specifications
|
