ELK M1 Z-Wave Interface
Flash memory for firmware updating
Connects to the M1 Data Bus - RS-485
LED indicators for status and programming
Push-button "copy" program switch
The Elk M1 Z-Wave Interface is a radio transceiver designed to allow an M1 Controller to interface with a Z-Wave network. The M1XZW interface functions as a Z-Wave Secondary Controller OR as a Z-Wave Static Update Controller (SUC) for holding the Z-Wave system setup programming. The interface connects to the M1 RS-485 data bus and is enrolled and identified as a Type 5 Expander. As such, it may be remotely located anywhere along the RS-485 data bus. The housing is designed for wall mounting and includes mounting screws and anchors. Note: for indoor use only.
Blending M1 and Z-Wave
M1 Controllers can be programmed to control Z-Wave network devices based on any number of events using the powerful rules engine. These events include, but are not limited to:
Time
Alarm System Arm Status
Status of Alarm System Sensors such as door contact, motion sensors, etc.
Task Activation
Sunrise /Sunset - Light/Dark
and more!
M1 Controllers can also control Z-wave network devices remotely. The M1Gold Control features a built-in, telephone remote control. With the M1XEP Ethernet Interface, both the M1Gold and M1EZ8 can control Z-Wave enabled devices over the internet, without the need for a dedicated, "24/7" server. Z-Wave technology is a wireless bi-directional communications network consisting of devices such as: Plug-in Dimmer Modules, Wall Mount Switches and Dimmers, Plug-in Appliance Modules, Motion/Occupancy Sensors, and HVAC Thermostats.
Specifications
Manufacturer: Elk
Manufacturer Product No: M1XZW
Dimensions: 4.25" x 6.375" x 2.125"
Power Requirements: 12 volts DC, 60 mA
Operating Temperature: 32-105° F (0-40° C)
Range max 100' to first Z-Wave device
Warranty: 2-year, limited
|
