6 Pack!! Screw-in lamp module allows you to add Z-Wave RF remote control to any indoor or outdoor light fixture with minimal effort
Safe for use with incandescent or compact fluorescent bulbs
Weather-resistant module is safe for use in dry, damp or wet locations
Essential Info
Adding wireless remote control to any outdoor light can be as easy as screwing in a light bulb. The Z-Wave™ Screw-In Lamp Module screws into the fixture base between the fixture and the bulb for a completely unseen addition that adds RF remote control to the light: Turn it on and off using any Z-Wave-enabled controller. This weather-resistant module is safe for use in dry, damp or wet locations, so you won't have to think twice about adding remote control to your coach lights, lampposts or outdoor floodlights up to 300 watts.
Manuals/Software
Installation and Owner's Manual, Warranty
What's Included
Screw-In Lamp Module
Instructions
More Info
Easy to Install & Set Up
Designed for standard light bulb fittings, the Z-Wave Screw-In Lamp Module can control incandescent lights up to 300 watts and compact fluorescent bulbs up to 42 watts. To set up the module, screw it into the fixture and the bulb into the module. Link it to your Z-Wave network following the instructions on your Z-Wave controller. You can also turn the light on and off manually. Note: The Z-Wave Screw-In Lamp Module is not recommended for enclosed fixtures with base-above-bulb mounting.
Automatic Repeating Increases Z-Wave Network Reliability
Each module in a Z-Wave network is designed to act as a repeater, automatically re-transmitting the RF signal to ensure that the signal is received by its intended destination by routing the signal around obstacles and radio dead spots. Feedback will allow you to see whether your device has received the on/off signal without having to look outside.
Specifications
Specifications
Manufacturer: Intermatic
Manufacturer Product No.: HA05C
UPC: 078275083912
Dimensions: 3 1/2" H x 3" diameter
Ratings: 300 watts, 2.5 amps Tungsten; 42 watts compact fluorescent
Power: 120V AC, 60Hz
RF Range: 50 feet
Operating Temperature Range: -31° F to 140° F (-35° C to 60° C)
Approvals: FCC, IC, CSA listed
Country of Manufacture: China
Warranty: 6 years, limited
|
