ASPIRE RF™ Accessory Dimmer
Wireless Smart Dimmer System Accessory
ASPIRE RF™ Accessory Dimmers replace regular switches or dimmers to provide local
and remote ON/OFF/DIM/BRIGHT control. The device also provides multi-location control
or virtual 3-way remote ON/OFF/DIM/BRIGHT control without the need for traditional
3-way wiring or a dedicated traveler wire. Moreover, ASPIRE RF Accessory Dimmers provide
other programmable functions (scenes, events, association, child lockout, etc…) when
used with ASPIRE RF or other Z-Wave® compliant controller*. Each dimmer can be
manually controlled and remotely controlled by commands sent from an ASPIRE
RF controller or other Z-Wave compatible controllers or programs. ASPIRE RF Dimmers
utilize existing 120 V/AC 60Hz standard house wiring and fit in standard wallboxes.
No new wiring is needed.
*(Note: some specific ASPIRE RF features may not be programmable)
• With award-winning ASPIRE™ Design System aesthetics,
ASPIRE RF devices match perfectly with any ASPIRE device
• Offered in three custom colors: Desert Sand, Silver Granite and
White Satin
• Softly curving arch; contrasting textures; velvet-smooth, quiet
actuation; and colors that subtly complement each other make
ASPIRE RF devices an integral element of any décor
• Fits in a single-gang wallbox and can be multi-ganged.
• Virtually unbreakable, extra-long, extra-wide mounting straps
and easy access ground screws provide reliability and speeds
up installation
• Compatible with ASPIRE Design System screwless wallplates
• Amber LED at bottom of LED bank illuminates to indicate load
status is On
• Electro-mechanical push pad for ON/OFF operation with separate
DIM/Bright bar
• LED light-level display for presetting illumination levels and
master/accessory units for multi-location control
• LED reduces brightness when in the OFF state
• 7 step blue LED display alongside push pad indicates selected
light level – even in full daylight (coordinates light level status with
associated Master dimmer)
• Can be used for single-pole, 3-way or multi-location control with
Master Dimmer
• Works with ASPIRE RF Master Dimmers (RF9534-N, RF9535-N,
RF9536-N, RF9537-N) or other manufacturer’s Z-Wave compliant
dimmers for 3-way, multi-location or wireless 3-way control without
the need for traditional 3-way wiring or for dedicated traveler wires
• Uses 200 Series Z-Wave chip at 40Kbs transmission rate
• Programmable rapid and delayed fading (up to 4 minutes)
• Z-Wave Compliant Certified
• Single button programming
• RFI filtering for radio, audio and video equipment
• Adjustable ramp rate
• Child Lockout feature
• Can be associated with up to 5 other devices
• All-On/All-Off inclusion
• Patent Pending Panic Mode
• Patented indicator system alerts if dimmer is not set
up in the network
• Pressing and holding push pad for 2 seconds brings
light to full brightness without affecting preset levels
• Power failure memory
Operation Features & Benefits
Applications
Design Features & Benefits
Catalog No. RF9542-Z
ASPIRE RF Dimmers
1.
PERFORMANCE
Rating: 120 V/AC, 60Hz
PERFORMANCE CONSIDERATION:
For best performance, an ASPIRE RF™ Z-Wave® enabled device must be
within 60 feet of another Z-Wave enabled device to participate in a Z-Wave
wireless mesh network. Any one dimmer or switch can be associated with up
to 5 devices (dimmers, switches, receptacles or plug-in modules).
TESTING & CODE COMPLIANCE
cULus Listed 6B28
NOM Certified
Complies with FCC Part 15, Class B
Z-wave Compliant Certified
TERMINATIONS
RF9542-Z has 3 wire leads for line, neutral and ground
MATERIAL CHARACTERISTICS
Meets flammability rating: V2 per UL94
Temperature Rating: 32ºF to 104ºF (0ºC to 40ºC)
WARRANTY
• 5 year limited product warranty.
• Product and performance warranties are extended to 10 years
if installed as part of an ASPIRE RF Certified Installer System
RF Wireless Smart Dimmer System Accessory
Description Colors Catalog No.
RF Accessory w/LEDs, DS, SG, WS RF9542-Z
compatible only w/RF Dimmers
To indicate color selection add one of the following suffixes to the Catalog No.: WS (White Satin) DS (Desert Sand), SG (Silver Granite)
Please reference the Instruction Sheet included with product for wiring
installation. For programming of the device, see the ASPIRE RF User
Manual, which is provided with either the Handheld (RFHDCSG) or
Tabletop (RFTDCSG) controllers. Both are also accessible online at
www.cooperwiringdevices.com/AspireRF.
Installation & Programming
Technical Specifications
Ordering Information
4.20”
(106.7mm)
1.80”
(45.7mm)
Visit our web site at:
www.cooperwiringdevices.com
United States 203 Cooper Circle, Peachtree City, GA 30269 • Phone: (866) 853-4293 • Fax: (800) 329-3055
Canada 5925 McLaughlin Road, Mississauga, Ontario, L5R 1B8 • Phone: (800) 267-1042 • Fax: (800) 761-5748
Project Name: Project Number:
Prepared By: Date:
Catalog No. RF9542-Z Product Specifications
DImensions
ASPIRE
|
