ASPIRE RF™ Dimmers replace regular switches or dimmers to provide local and remote ASPIRE RF™ Dimmers 600 Watt Low Voltage Switch
Wireless Smart Dimmer System Masters #RF9535
ON/OFF/DIM/BRIGHT control and are compatible with Incandescent, Magnetic Low-Voltage
and Electronic Low-Voltage lighting loads. Moreover, ASPIRE RF Dimmers provide other
programmable functions (scenes, events, association, child lockout, etc…) when used
with ASPIRE RF or other Z-Wave® compliant controller*. Each dimmer can be manually
controlled and remotely controlled by commands sent from an ASPIRE RF controller or
other Z-Wave compatible controllers or programs. ASPIRE RF Dimmers utilize existing
120 V/AC 60Hz standard house wiring and fit into standard wallboxes. No new wiring
needed.
*(Note: some specific ASPIRE RF features may not be programmable)
• With the award-winning ASPIRE™ Design System aesthetics,
ASPIRE RF devices match perfectly with any ASPIRE device
• Offered in three custom colors, Desert Sand, Silver Granite
and White Satin
• Softly curving arch; contrasting textures; velvet-smooth, quiet
actuation; and colors that subtly complement each other make
ASPIRE RF devices an integral element of any décor
• Fits in a single-gang wallbox and can be multi-ganged.
• Virtually unbreakable, ultrasonically welded top and backbody,
extra-long, extra-wide mounting straps and easy access ground
screws provide reliability and speeds up installation
• Compatible with ASPIRE Design System screwless wallplates
• Amber LED at bottom of LED display indicates On/Off load status
• Electro-mechanical push pad for ON/OFF operation with separate
DIM/Bright bar
• LED light-level display for presetting illumination levels and
master/accessory units for multi-location control
• LED reduces brightness when in the OFF state
• 7 step blue LED display alongside push pad indicates selected
light level – even in full daylight
• Can be used for multi-location control with use of Accessory
Dimmers (RF9542-Z)
• Works with ASPIRE RF Accessory Dimmer (RF9542-Z) for wireless
3-way control, eliminating the need for traditional 3-way wiring
or for a dedicated traveller wire
• Uses 200 Series Z-Wave chip at 40Kbs transmission rate
• Programmable rapid and delayed fading up to 4 minutes
(default is 10 seconds)
• Single button programming
• Z-Wave Compliant Certified
• Air-gap switch disconnects power from load forcing an OFF condition.
• RFI filtering for radio, audio and video equipment
• Adjustable ramp rate (up to 4 minutes)
• Child Lockout feature
• Can be associated with up to 5 other devices
• All-On/All-Off inclusion
• Patent Pending Panic Mode
• Patented indicator system alerts if dimmer is not set up in the
network
• Pressing and holding push pad for 2 seconds brings light to full
brightness without affecting preset levels
• Power failure memory
• Configurable “Power on State”
RF9534-N, RF9535-N, RF9536-N, RF9537-N Product Specifications
PERFORMANCE
Rating: 120 V/AC, 60Hz
Derating is required in multi-gang installations (See Derating Chart listed below)
PERFORMANCE CONSIDERATION:
An ASPIRE RF™ Z-Wave® enabled device must be within 60 feet of
another Z-Wave enabled device to participate in a Z-Wave wireless
mesh network. Any one dimmer or switch can be associated with
up to 5 devices (dimmers, switches, receptacles or plug-in modules).
TESTING & CODE COMPLIANCE
cULus Listed 6B28
NOM Certified
Complies with FCC Part 15, Class B
Z-Wave Compliant Certified
TERMINATIONS
Dimmers have 4 wire leads for line, load, ground and neutral
MATERIAL CHARACTERISTICS
Meets flammability rating: V2 per UL94
Temperature Rating: 32ºF to 104ºF (0ºC to 40ºC)
WARRANTY
• 5 year limited product warranty.
• Product and performance warranties are extended to 10 years
if installed as part of an ASPIRE RF Certified Installer System
RF Smart Dimmers
Catalog No. 1-Gang 2-Gang 3 or more Gangs
RF9534-N 600W (MLV-450W) 600W (MLV-450W) 600W (MLV-450W)
RF9535-N 600W 600W 600W
RF9536-N 1000W (MLV-750W) 800W (MLV-600W) 800W (MLV-600W)
RFPlease reference the Instruction Sheet included with product for wiring
installation. For programming of the device, see the ASPIRE RF User
Manual, which is provided with either the Handheld (RFHDCSG) or
Tabletop (RFTDCSG) controllers. Both are also accessible online at
www.cooperwiringdevices.com/AspireRF.
Installation & Programming
RF Smart Dimmer Master Device
Description Color Catalog No.
600W Incandescent/Magnetic Low Voltage DS, SG, WS RF9534-N
600W Electronic Low Voltage DS, SG, WS RF9535-N
1000W Incandescent/Magnetic Low Voltage DS, SG, WS RF9536-N
1000W Electronic Low Voltage DS, SG, WS RF9537-N
To indicate color selection add one of the following suffixes to the Catalog No.: WS (White Satin) DS (Desert Sand), SG (Silver Granite)
Ordering Information9537-N 1000W 800W 800W
|
